Digiscoping adapters

In Scandinavia and the Benelux this adapter is considered to be the best by far.
When people see this model they place the old adapter in the drawer and buy this!

Digiscope adapters are available for the following telescopes (only for angled eyepieces, NOT for straight eye-pieces):

Kowa 800 series zoom
Leica zoom (eye-piece lock-pin)
Leica zoom (eye-piece without lock-pin)
Leica 32X W
Swarovski AT 80 zoom (rubber eye-cup with threading)
Swarovski AT 80 zoom (rubber eye-cup without threading)
Swarovski ATS 80 zoom
Zeiss zoom
Zeiss 30X
Nikon fieldscope (20/24xw not available)


DESCRIPTION on the adapter and the advantages

The PATENTED construction includes following (see attached photos)

- adapter consists of 2 parts; the base-ring and the tube
- base ring is always installed on the eyepiece
- tube has two slots which fits on the base-ring locking screw
- the diameter of the camera connection is 28 mm (see below for step-down rings)

This system brings advantages

1. no screws to tighten and thus
2. faster than other systems by far
3. you are ready to shoot in 3 seconds
4. the tube slides easily on the eyepiece
5. you can use the zoom when taking shots as there is a hole (depending on type) in the tube for this
6. 2 slots at 90 degrees angles allows you to change from portrait to landscape in 2 seconds
7. nice laser-cut craftsmanship

No. 1- 4 are important; you can spot the scope on the bird and will find it again in the camera monitor. This is not the case with other adapters which have a tight tolerance and you must use force to get them in place. By doing this you move the scope and the target is lost.

The price is € 145,00 (excluding P&P: Eur € 7,50 for Europe and Eur € 9,50 to the US). Ask for details or place your order at: info [@] cursorius.com

Now available are step-down rings from 37 to 28 mm, 52 to 28 mm and from 58 to 28 mm. Price for one ring is € 25,00 (excluding P&P)